Download Katalog Omron
PS ELECTRODE HOLDER
Fitur :
- PS – [] S (R) adalah Pemegang Elektroda terpisah yang memungkinkan Elektroda ditarik dengan mudah untuk diperiksa.
- PS – [] S (R) tersedia dalam 3, 4, atau 5 model tiang untuk suplai dan drainase air ledeng pada bangunan.
- PS-31 adalah Pemegang Elektroda kecil dan ringan yang cocok untuk pemasangan di ruang terbatas dan komponen bawaan.
Spesification :
| Model | PS-3S(R) *1 | PS-4S(R) *1 | PS-5S(R) *1 | PS-31 *2 |
| No. of Electrodes | 3 | 4 | 5 | 3 *3 |
| Material | Resin (PBT = Polybutylene terephthalate) | |||
| Insulation resistance | 100 MΩ min. | |||
| Operating temperature | -10 to 70°C (with no icing) | |||
| Operating pressure | Atmospheric pressure | |||
| Applications | Water supply and drainage control in buildings | Limited Mounting Space | ||
| Electrodes | Purchase F03-01 separately. | Single-piece construction | ||
catatan:
- Pemegang Elektroda Dua-kawat (model R) memiliki resistor bawaan 6,8 kΩ. Mereka harus digunakan dengan Pengontrol 61F Dua-kawat.
- Potong elektroda sesuai panjang yang diinginkan.
- PS-31 datang dalam model 3-tiang saja.
 |
|
 / BS-1(T) - Electrode Holder | Jual Produk Omron Image](http://elmecon-mk.com/wp-content/uploads/2019/05/bf-r-bs-1t-1557218150.jpg)
BF-[](R) / BS-1(T) – Electrode Holder
Fitur :
BF-1 sangat ideal untuk cairan dengan resistansi spesifik rendah, seperti air limbah.
- BF – [] (R) digunakan saat pemasangan yang kuat diperlukan.
- BS-1 digunakan saat tahan suhu tinggi, tekanan tinggi diperlukan.
- BS-1T digunakan saat ketahanan korosi diperlukan.
Spesifikasi :
| Model | BF-1 | BF-3(R) *1 | BF-5(R) *1 | BS-1 | BS-1T |
| No. of Electrodes | 1 | 3 | 5 | — | — |
| Insulator material | PPS resin (Metallic section is SUS.) | Fluorocarbon polymer (PFA) | |||
| Insulation resistance | 100 MΩ | ||||
| Operating temperature | Electrode section: -10 to 150°C (with no icing) Terminal section: -10 to 70°C (with no icing or condensation) |
250°C max. | 180°C max. | ||
| Operating pressure | Atmospheric pressure | 1.96 MPa *2 | 981 kPa *2 | ||
| Applications | Liquids with low specific resistance, such as wastewater and cloudy water |
General applications for purified water and wastewater |
Boiler water level detection or high- temperature tanks |
Acid or alkaline solution level detection |
|
* 1. Two-wire Electrode Holders (model R) memiliki resistansi bawaan 6,8 kΩ. Mereka harus digunakan dengan two-wire
control 61F.
* 2. Harus ada suhu sekitar yang cukup di lingkungan bertekanan tinggi untuk mencegah kebocoran uap. Menggunakan
Pemegang Elektroda sesuai dengan kurva suhu-tekanan berikut.
|
 |
61F – Floatless Level Controller
Fitur :
- Perawatan mudah dengan Unit Relay blok-bangunan.
- Identifikasi status pengoperasian dengan mudah dengan indikator operasi LED.
- Susunan pemain mencakup model untuk wilayah tropis dan untuk suhu tinggi. Mencapai deteksi stabil bahkan di lingkungan dengan suhu tinggi.
Spesification :
| Items | General-purpose Controller 61F-[] (TDL) *1, *2 |
High-temperature Controller 61F-[]T *1 |
Long-distance Controllers 61F-[]L 2KM (for 2 km) 61F-[]L 4KM (for 4 km) *1 |
| Controlling materials and operating conditions |
For control of ordinary purified water or sewage water |
For control of ordinary purified water or sewage water in cases where the ambient temperature is high. |
For control of ordinary purified water in cases where the distance between sewage pumps and water tanks or between receiver tanks and supply tanks is long or where remote control is required. |
| Supply voltage | 100, 110, 120, 200, 220 or 240 VAC; 50/60 Hz | ||
| Operating voltage range | 85% to 110% of rated voltage | ||
| InterElectrode voltage | 8 VAC | ||
| InterElectrode current | Approx. 1 mA AC max. | ||
| Power consumption | 61F-G[]: 3.5 VA max.; G1F-G1[], G1F-G2[], or G1F-I[]: 5.5 VA max.; G1F-G3[]: 7.5 VA max.; G1F-G4[]: 14.5 VA max. |
||
| InterElectrode operate resistance |
0 to approx. 4 kΩ | 0 to approx. 5 kΩ | 0 to approx. 1.8 kΩ (for 2 km) 0 to approx. 0.7 kΩ (for 4 km) |
| InterElectrode release resistance |
Approx. 15 k to ∞ Ω | Approx. 15 k to ∞ Ω | 4 k to ∞ Ω (for 2 km) 2.5 k to ∞ Ω (for 4 km) |
| Cable length *3 | 1 km max. | 600 m max. | 2 km max. 4 km max. |
| Control output | 2 A, 220 VAC (Inductive load: cosφΦ = 0.4) 5 A, 220 VAC (Resistive load) |
||
| Ambient temperature | Operating: -10 to 55°C (-10 to 70°C for 61F-[]T) | ||
| Ambient humidity | Operating: 45% to 85% RH | ||
| Insulation resistance *4 | 100 MΩ min. (at 500 VDC) | ||
| Dielectric strength *4 | 2000 VAC, 50/60 Hz for 1 min. | ||
| Life expectancy | Electrical: 500,000 operations min. Mechanical: 5,000,000 operations min. |
||
| Weight | 61F-G[]: Approx. 380 g, G1F-G1[], G1F-G2[], or G1F-I[]: Approx. 750 g; G1F-G3[]: Approx. 930 g; G1F-G4[]: Approx. 1,710 g |
||
| Items | High-sensitivity Controllers 61F-[]H *1 |
Low-sensitivity Controller 61F-[]D *1 |
Two-wire Controller 61F-[]R *1 |
| Controlling materials and operating conditions |
For control of liquids with high specific resistance such as distilled water |
For control of liquids with low specific resistance such as salt water, sewage water, acid chemicals, alkali chemicals |
For control of ordinary purified water or sewage water used in combination with Two-wire Electrode Holder (incorporating a resistor of 6.8 kΩ) It is possible to wire with less than one wiring against general 61F’s wiring. |
| Supply voltage | 100, 110, 120, 200, 220 or 240 VAC; 50/60 Hz | ||
| Operating voltage range | 85% to 110% of rated voltage | ||
| InterElectrode voltage | 24 VAC | 8 VAC | |
| InterElectrode current | Approx. 1 mA AC max. | ||
| Power consumption | 61F-G[]: 3.5 VA max.; G1F-G1[], G1F-G2[], or G1F-I[]: 5.5 VA max.; G1F-G3[]: 7.5 VA max.; G1F-G4[]: 14.5 VA max. |
||
| InterElectrode operate resistance |
Approx. 15 kΩ to 70 kΩ *5 |
0 to approx. 1.8 kΩ | 0 to approx. 1.1 kΩ |
| InterElectrode release resistance |
Approx. 300 k to ∞ Ω | Approx. 5 k to ∞ Ω | Approx. 15 k to ∞ Ω |
| Cable length *3 | 50 m max. | 1 km max. | 800 m max. |
| Control output | 2 A, 220 VAC (Inductive load: cosφΦ = 0.4) 5 A, 220 VAC (Resistive load) |
||
| Ambient temperature | Operating: -10 to 55°C (-10 to 70°C for 61F-[]T) | ||
| Ambient humidity | Operating: 45% to 85% RH | ||
| Insulation resistance *4 | 100 MΩ min. (at 500 VDC) | ||
| Dielectric strength *4 | 2000 VAC, 50/60 Hz for 1 min. | ||
| Life expectancy | Electrical: 500,000 operations min. Mechanical: 5,000,000 operations min. |
||
| Weight | 61F-G[]: Approx. 380 g, G1F-G1[], G1F-G2[], or G1F-I[]: Approx. 750 g; G1F-G3[]: Approx. 930 g; G1F-G4[]: Approx. 1,710 g |
||
* 1. [] Pada nama model mewakili G, G1, G2, G3, G4, dan I.
* 2. Akhiran “TDL” yang melekat pada nama model mewakili model yang dirancang untuk daerah tropis (kelembaban penyimpanan
45% hingga 90%). Untuk detail, lihat Tindakan Pencegahan Keselamatan untuk Pengendali Tingkat Floatless.
* 3. Panjang saat menggunakan kabel cabtire yang sepenuhnya terisolasi, 600-V, 3-konduktor (0,75 mm2). Panjang kabel yang dapat digunakan akan
menjadi lebih pendek karena diameter kabel atau jumlah konduktor menjadi lebih besar. Untuk detail, lihat Keselamatan
Tindakan Pencegahan untuk Pengendali Level Floatless.
* 4. Resistensi isolasi dan kekuatan dielektrik menunjukkan nilai antara terminal daya dan terminal Elektroda,
antara terminal daya dan terminal kontak, dan antara terminal Elektroda dan terminal kontak.
* 5. Dimungkinkan untuk digunakan dengan 15 kΩ atau kurang, namun, ini dapat menyebabkan kegagalan reset.
* 6. Pengontrol sensitivitas tinggi menggunakan operasi tingkat lanjut.
Ketika tegangan catu daya diterapkan, jika ada beberapa cairan antara elektroda (arde dan operasi
elektroda), relai internal tidak akan beroperasi.
Ketika tegangan catu daya diterapkan, jika tidak ada cairan antara elektroda (arde dan operasi
elektroda), relai internal akan beroperasi.
|
|
![Electrode F03 - [] | Jual Produk Omron Image](http://elmecon-mk.com/wp-content/uploads/2019/05/f03-electrode-1557301242.jpg)
Electrode F03 – [] Omron
Fitur :
- Elektroda Standar terbuat dari stainless steel (SUS 304) dan dapat digunakan dalam aplikasi untuk air murni.
- SUS316 Elektroda dapat digunakan dalam aplikasi di mana ketahanan terhadap korosi diperlukan. Titanium dan HAS Elektroda dapat digunakan dalam aplikasi di mana resistensi terhadap asam diperlukan.
- Untuk aplikasi yang membutuhkan elektroda panjang, mur sambungan dan dua Mur Pengunci dapat digunakan untuk memperpanjang elektroda 1 m pada satu waktu.
Conneting Nut F03-02 SUS304 Omron
Material indications are provided on all OMRON electrodes, connection nuts, … An Electrode Set consists of an electrode, a connecting nut, and two Lock Nuts.
Lock Nut F03-03 SUS304 Omron
Only SUS304 and SUS316 Lock Nuts come with spring washers made of the same material. HAS B, HAS C and. TITANIUM don’t come with spring washer.