Download Katalog Omron

Informasi dan Pusat Download :

C200HW-DRM21

Download Katalog/Manual/Data Sheet Book disini <<

DeviceNet Master for C200HX, C200HG, C200HE, C200HS, and CS1

  • Incorporating a remote I/O and message communications functions.
  • The Configurator is available for easy remote I/O
    allocation.
  • The control of a maximum of 300 words is possible over remote I/O with the C200HX, C200HG, or C200HE.
  • The Configurator makes it possible for a single Programmable Controller to connect to a maximum of 16 Masters.

C200HW-DRT21

Download Katalog/Manual/Data Sheet Book disini <<

I/O Link Module is ideal for distributed control. PLC can be used as an Intelligent Slave on the DeviceNet.

  • Intelligent Slave for DeviceNet
  • Supports I/O and message communications.
    Maximum I/O area size:
    512 input points (32 words)c200hw-nc___
    512 output points (32 words)
  • Programming Console or Configurator freely
    allocates I/O areas

C200HW-NC

Download Katalog/Manual/Data Sheet Book disini <<

CS1 Series, C200HX/HG/HE, C200HS, C200H
Position Control Unit C200HW-NC113, C200HW-NC213, and C200HW-NC413

C200HW-PRT21

Download Katalog/Manual/Data Sheet Book disini <<

I/O Link Unit for C200H_ and CS1 PLC Ideal for distributed control.

  • PLC can be used as an Intelligent Slave on PROFIBUS-DP.
  • Total of 0-100 words and or 0-100 words out.
  • PROFIBUS-DP node address (001-125) by three rotary switches.

C200HW-SRM21/V1

Download Katalog/Manual/Data Sheet Book disini <<

Master Unit for CS1, C200HX, C200HG, C200HE, and C200HS

  • A maximum of 256 I/O points available.
  • Connects to a maximum of 32 Slaves.
  • Communications cycle time: 0.5 ms max. (at baud rate 750 kbps).
  • Communications distance: Extended to 500 m max. (at baud rate 93.75 kbps).
  • Connection to Analog Terminals now supported.

CJ1W-AD/DA/MAD

Download Katalog/Manual/Data Sheet Book disini <<

It transmits 16 points of I/O signals per word with a pair of cables. Easy and minimized wiring effort

CJ1W-B7A

Download Katalog/Manual/Data Sheet Book disini <<

High-Speed, Flexible Control With A Wide Array of Features

  • Equipped with 2 Counters and counts over a maximum binary range of 32-bits.
  • Accepting input pulse frequencies of up to 500 kHz allows precise control of fast motions.
  • The Unit is equipped with 2 Digital Inputs, 2 Digital Outputs and 30 Soft Outputs.
  • A maximum response time of 0.5 ms guarantees high-speed closed loop control of applications.

CJ1W-CT021

Download Katalog/Manual/Data Sheet Book disini <<

For Various Analog I/Os

  • Analog Input Units for converting analog input signals into binary data
  • Analog Output Units for converting binary data into analog output signals

CJ1W-IC/II

Download Katalog/Manual/Data Sheet Book disini <<

Expand CJ-series PLCs with
These Units

  • To expand a CJ-series PLC, connect an I/O Control Unit to the CPU Rack, and I/O Interface Unit to the Expansion Rack, and connect the two Units with I/O Expansion Cable.

CJ1W-ID/IA

Download Katalog/Manual/Data Sheet Book disini <<

A Wide Range of Basic Input Units for High Speed Input and Different Applications

  • Receive ON/OFF signals from external devices into the PLC System to update I/O memory in the CPU Unit.
  • New high-speed input models CJ1W-ID212 and CJ1W-ID233 are now available. These units can help to increase system throughput

CJ1W-OC/OA/OD

Download Katalog/Manual/Data Sheet Book disini <<

A Wide Range of Basic Output Units for High Speed Output and Different Applications

  • These Output Units receive the results of
    output instructions from the CPU Unit and
    perform ON/OFF control for external devices.
  • High-speed Output models CJ1W-OD213 and
    CJ1W-OD234 can help to increase system
    throughput

CJ1W-PA205C / C200HW-PA204C

Download Katalog/Manual/Data Sheet Book disini <<

Power Supply Units with Maintenance Forecast Monitor for SYSMAC PLCs

CJ1W-PA/PD

Download Katalog/Manual/Data Sheet Book disini <<

Equipped with the RUN output for checking the operation status, as well as the replacement notification function for easy maintenance. Lineup of five models including the AC power supply (25W).

CJ1W-TS561

Download Katalog/Manual/Data Sheet Book disini <<

The CJ1W-TS561 is a 6-channel input unit for K-type and J-type thermocouples. It can be installed in any CJ1-series PLC system. It is classified as a basic I/O unit, occupying 48, 64 or 96 I/O points, depending on the number of activated inputs. Always verify that the maximum I/O capacity of the CJ1 CPU is sufficient for the number of required I/O points

CJ2M-CPU3_/CPU1-MD21_

Download Katalog/Manual/Data Sheet Book disini <<

The accumulated experience and advancements in technology now result in CJ2M; fully compatible, yet fully new.

  • Increased performance, and increased memory capacity
  • Up to 40 I/O unit on any CPU
  • Pulse I/O Modules add position control functions to any CPU
  • USB for plug-and-play access to the PLC
  • All models available with or without Ethernet port
  • Choice of serial port plug-in modules

CJ2M-CPU3_/CPU1_

Download Katalog/Manual/Data Sheet Book disini <<

The accumulated experience and advancements in technology now result in CJ2M; fully compatible, yet
fully new.

  • Increased performance, and increased memory capacity
  • Up to 40 I/O units on any CPU
  • USB for plug-and-play access to the PLC
  • All models available with or without Ethernet port
  • Choice of serial port plug-in modules
  • User-friendly programming, faster debugging

CJ2M-ETN

Download Katalog/Manual/Data Sheet Book disini <<

SYSMAC CS and CJ Series
CS1W-EIP21 (100Base-TX)
CJ1W-EIP21 (100Base-TX)
CJ2H-CPU6
@-EIP (100Base-TX)
CJ2M-CPU3@ (100Base-TX/10Base-T

(Operation Manual)

CJ2M FAMILY

Download Katalog/Manual/Data Sheet Book disini <<

CJ2M for basic machine automation

The CJ2M Series is ideal for packaging and general machine automation needs. Connectivity is assured thanks to the built-in USB port and the choice of Ethernet and RS-232C/422/485 interfaces on the CPU

CJ2M Manual

Download Katalog/Manual/Data Sheet Book disini <<

SYSMAC CS Series
CS1
@-CPU@@@-@@
SYSMAC CJ Series
CJ2H-CPU6
@-EIP
CJ2H-CPU6@
CJ2M-CPU@@
CJ1@-CPU@@@-@
SYSMAC One NSJ Series
NSJ@@-@@@@@-@@@

CP Series CP1L / CPU Unit

Download Katalog/Manual/Data Sheet Book disini <<

High Performing Programmable Controller with Embedded Ethernet

  • “CP1L-EM” and “CP1L-EL” has a standard-feature Ethernet port.
  • “CP1L-M” and “CP1L-L” has a standard-feature peripheral USB port.
  • Function blocks (FB) allow you to build up modular structure and programming of ladder diagrams

CP1 FAMILY

Download Katalog/Manual/Data Sheet Book disini <<

CP1 family features at a glance

  • 10 to 60 I/O base models, expandable to 320 I/O points
  • Digital, analog and temperature sensor I/O expansion units
  • 4 to 6 High-speed encoder inputs and 2 to 4 high-speed pulse outputs

CP1E Series

Download Katalog/Manual/Data Sheet Book disini <<

Cost-Effective, Easy Application, Application to Many Systems

CP1E Series

Download Katalog/Manual/Data Sheet Book disini <<

The CP1E Programmable Controller: Economical, Easy to use, and Efficient

  • The E@@(S)-type Basic CPU Units provide cost performance and easy application with only basic functionality.
  • The N@@(S@) and NA-types Application CPU Units support Programmable Terminal connection, position control, and inverter connection

3G3M(R)V-PDRT2

 Download Katalog/Manual/Data Sheet Book disini <<

3G3MV-PDRT2 (Unit for 3G3MV Inverters)

3G3RV-PDRT2 (Card for 3G3RV or 3G3FV Inverters)

3G3MX2-A4015-V1

Download Katalog/Manual/Data Sheet Book disini <<

Born to drive machines

  • Positioning functionality.
  • Fieldbus communications with optional unit
  • Drive Programming.

3G3MX2-V1

Download Katalog/Manual Book disini <<

Born to drive machines

  • Positioning functionality.
  • Fieldbus communications with optional unit
  • Drive Programming.

61F – Series

Download Katalog/Manual Book disini <<

Automatic Water Supply and Drainage Control

  • Ideal for level control of any conductive liquid
  • Both general-purpose and panel-use models available
  • Incorporates an arrester for surge and induced lightning protection

BF-(R)_BS-1(T)

Download Katalog/Manual Book disini <<

Complete Lineup for Use in High-temperature, High-pressure Environments or Where Exposed to Chemicals

  • The BF-1 is ideal for liquids with low specific resistance, such as wastewater.
  • The BF-@(R) is used when a strong mounting is required

CX- One

Download Katalog/Manual Book disini <<

A Smart Input Function Greatly Reduces the Work Required to Input Programs

D4MC

Download Katalog/Manual Book disini <<

Economical, High Utility Enclosed Switch

  • Enclosed Switches with Built-in Basic Switches for High
  • Repeatability and Durability of 10 Million Operations Minimum.
  • Panel mount versions have the same operating position as Z Basic Switch.
  • Suitable for applications demanding higher mechanical
  • Strength, dustproof and drip-proof properties than those on basic switches

E2E Series

Download Katalog/Manual Book disini <<

Your Search for Proximity Sensors Starts with the World-leading Performance and Quality of the E2E

  • Standard Sensors for detecting ferrous metals.
  • Wide array of variations. Ideal for a variety of applications.
  • Models with different frequencies are also available to prevent mutual interference

E3JK-E432

Download Katalog/Manual Book disini <<

Long-distance Photoelectric Sensor That Supports AC/DC Power Supplies

  • Long sensing distance that is approximately 8 times that of our conventional model (for the
  • Through-beam and Diffuse-reflective models). (Through-beam: 40 m, Retro-reflective: 7 m, and Diffuse-reflective: 2.5 m.)
  • Improved visibility. A red LED that makes the spot visible, Large indicators that can be seen even from a distance

E3Z-DS

Download Katalog/Manual Book disini <<

The Standard for Photoelectric Sensors with a Secure Track Record of One Million Sold Yearly.

  • Long sensing distance of 30 m for Through-beam Models, 4 m for
  • Retro-reflective Models, and 1 m for Diffuse-reflective Models.
  • Mechanical axis and optical axis offset of less than ±2.5° simplifies optical axis adjustment

E5CC

Download Katalog/Manual Book disini <<

E5@C Series That Pursues Greater Visibility with Large White PV Display

E5CC-E5EC-800

Download Katalog/Manual Book disini <<

A Complete Range of I/O Capacites, Functions, and Performance, Handle More Applications

E5CSl-E5CWL-E5EWL

Download Katalog/Manual Book disini <<

The General Purpose controller with the best price/performance ratio

E39-I_F39-I_E39-S_E39-R_DS

Download Katalog/Manual Book disini <<

Mounting Brackets E39-L

Slits/Reflectors E39-S/E39-R

F03-D Series

Download Katalog/Manual Book disini <<

Compact, Resistant to Mutual Interference, and Ideal for Picking a Variety of Parts.

  • Mounts to a parts rack and uses indicators to show parts picking procedures. Functions as a mistake-proofing Sensor.
  • Use either the built-in LED indicators or external picking indicators

F03-E Series

Download Katalog/Manual Book disini <<

Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts.

  • A variety of part sizes can be handled: F3W-D sensing width: 100 mm, F3W-E sensing width: 50 mm.
  • Low-profile Sensor with thickness of 8 mm and enlargeable work opening

F03 Series

Download Katalog/Manual Book disini <<

A Wide Variety of Electrodes for long lasting Rebility

  • Standard Electrodes are made of stainless steel (SUS 304) and can be used in applications for purified water.
  • SUS316 Electrodes can be used in applications where resistence to corrosion is required

G4Q

Download Katalog/Manual Book disini <<

Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation

  • Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input and is thus ideal for alternate operation or transfer/switching operation of a motor.
  • Positive operation is assured due to the unique ratchet mechanism

H3BA-N_

Download Katalog/Manual Book disini <<

Solid-state Timer with Valuable Multiple-time Ranges and Multiple-operating Modes

  • Handles a wide range of applications through eight operating modes.
  • With H3BA-N8H models, the output type can be switched between time-limit DPDT and time-limit SPDT + instantaneous SPDT using a selector

H3CR-A

Download Katalog/Manual Book disini <<

DIN 48 x 48-mm State-of-the-art Multifunctional Timer

  • A wider power supply range reduces the number of timer models kept in stock.
  • A wide range of applications through six or four operating modes.
  • Reduced power consumption. (Except for H3CR-A8E)

H3CR FAMILY

Download Katalog/Manual Book disini <<

DIN 48 x 48-mm Multifunctional Timer Series

  • Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.
  • Approved by UL and CSA.

H3Y_M092_E

Download Katalog/Manual Book disini <<

Miniature Timer Compatible with the MY Relay

  • The Push-In Plus Terminal Block Socket-compatible H3Y-@-B/H3YN-@-B Timers in a black design join the Single-mode H3Y and Multi-mode H3YN.
  • The H3Y-@-B and H3YN-@-B are UL listed when they are used together with Push-In Plus Terminal Block Sockets

H7E-N_DS_E

Download Katalog/Manual Book disini <<

Compact Economical Totalizer with High Visibility Available with Backlit LCD Display

  • Large display with 8.6-mm character height.
  • Includes new models with backlight for improved visibility in dimly lit places. (Requires 24-VDC power supply.)
  • Black and light-gray cases now available.

K3HB-V

Download Katalog/Manual Book disini <<

An Ideal Indicator for OK/NG Judgements in Automated and Picking Machines, Measuring Factors such as Pressure, Load, Torque, and Weight Using Load Cell Signal Input.

  • Easy recognition of judgement results using color display that can be switched between red and green.
  • Equipped with a position meter for monitoring operating status trends.
  • External event input allows use in various measurement and discrimination applications.

K3HB-X_V_H_S

Download Katalog/Manual/Data Sheet Book disini <<

This manual describes the functions, performance, and application methods needed for optimum use of the K3HB. Please observe the following items when using the K3HB.

  • This product is designed for use by qualified personnel with a knowledge of electrical systems.
  • Read this manual carefully and make sure you understand it well to ensure that you are using the K3HB correctly.
  • Keep this manual in a safe location so that it is available for reference when required

K8AK-AS_N179-E1

Download Katalog/Manual/Data Sheet Book disini <<

Ideal for current monitoring for industrial facilities and equipment.

  • Monitor for overcurrents or undercurrents
  • Use commercially available CTs (CT current on secondary side: 0 to 1 A or 0 to 5 A)
  • Manual restting and automatically resetting supported by one relay

K8AK-LS

Download Katalog/Manual/Data Sheet Book disini <<

Ideal for current monitoring for industrial facilities and equipment.

  • Self-holding circuit implemented with circuit processing that is not depending on external wiring
  • Switch between water suplay and discharge with a DIP switch setting.
  • Sensitive adjustment of operating resistance from 10 k to 100 k for applications to a wide range of liquids

LY Series

Download Katalog/Manual/Data Sheet Book disini <<

A Miniature Power Relay

  • Equipped with arc barrier.
  • Dielectric strength: 2,000 V.
  • Built-in diode models added to the LY Series.

MKS Series

Download Katalog/Manual/Data Sheet Book disini <<

New Super MK Relays. Models with Latching Lever Added to the Series.

  • Same mounting and internal wiring as the previous Super MK Relays
  • Built-in mechanical indicator enables checking contact operation.
  • Two modes can be used to check circuits for models with latching lever

MY_DS_E

Download Katalog/Manual/Data Sheet Book disini <<

New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays

  • Reduces wiring work by 60% when combined with the PYF-PU Push-In Plus Socket (according to actual OMRON measurements).
  • Now lead-free to protect the environment.
  • VDE certification (Germany).

MY4H Series

Download Katalog/Manual/Data Sheet Book disini <<

Hermetically Sealed Relay Ideal for Hazardous Locations

  • Class 1 Division 2 approved.
  • Fully hermetically sealed for hazardous locations.
  • Cadmium-free contacts for environment-friendly use.

MY-GS-DS-E

Download Katalog/Manual/Data Sheet Book disini <<

Mechanical Indicators Added as a Standard Feature to Our Best-selling MY General-purpose Relays

  • A lineup of models with latching levers added for easier circuit checking.
  • Reduces wiring work by 60% when combined with the PYF-PU Push-In Plus Socket (according to actual OMRON measurements).
  • Relays with AC and DC coils have different colors of operating indicators (LEDs)

MY-GS_J196-E1

Download Katalog/Manual/Data Sheet Book disini <<

Easier to See, Easier to Use

OMRON insists on inhouse production from component molds to manufacturing facilities to better meet your needs

NB_V412-E1

Download Katalog/Manual/Data Sheet Book disini <<

Give more value to your machines with Omron’s NB Series: compact range application HMI. Enjoy his the aesthetic sense and excellent visibility

P20E-EN-02 + CP1L

Download Katalog/Manual/Data Sheet Book disini <<

When it comes to controllers for compact machines, Omron’s new CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC.

  • 4 high-speed encoder inputs and 2 high-speed pulse outputs
  • CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
  • Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC

PYF_S_P2RF__

Download Katalog/Manual/Data Sheet Book disini <<

New Screwless Terminal Sockets Added for MY and G2R Relays.

  • Simplified wiring without tightening screws.
  • Two wires can be independently wired for each terminal.
  • Coil terminals and contact terminals are completely separated in an organized wiring layout

PYF-PU_P2RF-PU_J212-E1

Download Katalog/Manual/Data Sheet Book disini <<

Sockets with Push-In Plus technology to Save Work Added to Series for MY and G2R-S Relays

  • Sockets with Push-In Plus technology are used to save wiring work in comparison with traditional screw terminals. (Wiring time is reduced by 60%* in comparison with traditional screw terminals.)
  • No screw loosening means maintenance-free application.
  • Light insertion force and strong pull-out strength to achieve both less wiring work and high reliability

S8FS-C_T062-E1

Download Katalog/Manual/Data Sheet Book disini <<

High Reliability at a Reasonable Cost. Reliable, Basic Power Supplies That Contribute to Stable Equipment Operation.

  • High Reliability: Enhanced abnormal overvoltage resistance and lightning surge resistance for stable operation even with an unstable input voltage.
  • Long Life: Japanese 105°C electrolytic capacitors are used to achieve stable quality and long life. A reliable 3-year warranty.*
  • Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC

S8FS-C_T063-E1

Download Katalog/Manual/Data Sheet Book disini <<

Design with details in mind provides stable quality and reliability.

S8VS_T026-E1

Download Katalog/Manual/Data Sheet Book disini <<

Multi-Function Indication Monitor for Production Site Visualization.

  • Status displayed on 3-digit, 7-segment display.
  • Signal output notifications at 90 W or more.
  • Conformity to various safety standards for global usability

V Series

Download Katalog/Manual/Data Sheet Book disini <<

Miniature Basic Switch that Offers High Reliability and Security.

  • Wide variation of best-selling microswitches with switching currents of 10 to 21 A.
  • Can be used for interrupting current when doors are opened or closed.
  • Available in two types of cases: thermoplastic resin and thermosetting resin

V098-E1-04 + NS Series

Download Katalog/Manual/Data Sheet Book disini <<

Programmable Terminals (the NS-series Setup Manual, NS-series Programming Manual, and the CX-Designer online help), and then use this manual for Host Link communications

V680 RFID

Download Katalog/Manual/Data Sheet Book disini <<

V680-series DeviceNet-compatible Slaves for RFID Systems. Read and Write Up To 58 Bytes.

  • V680-series DeviceNet-compatible Slaves for RFID systems.
  • Includes a built-in Amplifier, yet has a compact size of 65 × 65 × 65 mm. Compatible with V680-series ID Tags and Antennas.
  • Read and write 4, 26, or 58 bytes of data.

VB Limit Switch

Download Katalog/Manual/Data Sheet Book disini <<

Three Technologies Supporting Effective and Efficient Ionization

VB_DS

Download Katalog/Manual/Data Sheet Book disini <<

A New monoblock multiple limit switch incorporating box with a tough head and ensuring high sealing performance and a mechanical durability of 5.000.000 operations.

  • Used for the sequential control of a variety of engeneering machines and belt conveyor lines
  • Built-in oil filter shuts out oil and water
  • Approved by EN, IEC (Ground terminal models only) and CCC (Chinese standard). Ask your omron representative for information on approved models

WLCL-LD

Download Katalog/Manual/Data Sheet Book disini <<

Shape / Structure General-purpose Limit switches service life General type.

Operating mechanism Snap action. Actuator Adjustable rod lever (3 dia., Stainless steel rod, 25 to 141 mm) Frequency 50/60 Hz

Z Series

Download Katalog/Manual/Data Sheet Book disini <<

Best-selling Basic Switch Boasting High Precision and Wide Variety

  • A large switching capacity of 15 A with high repeat accuracy.
  • A wide range of variations in contact form for your selection: basic, split-contact, maintained-contact, and adjustable contact gap types.
  • A series of standard models for micro loads is available.

ZJ Series

Download Katalog/Manual/Data Sheet Book disini <<

The highest level of ionization in its class

ZN-C

Download Katalog/Manual/Data Sheet Book disini <<

Easy and Quick “Checking Power” at the worksite

  • Power is indicate
  • Battery powered, Fixed by Magnet and ultra-thin
  • Ultra-Easy Way of logging Electricity

ZX1 Smart Sensor

Download Katalog/Manual/Data Sheet Book disini <<

A CMOS Laser Sensor That’s Optimum for Simple Measurements.

  • A resolution of 0.002 mm that’s suitable for simple measurements.
  • Stable measurements for any type of workpiece.
  • Models available with four different distance specifications.
  • Long-distance model for up to 1,000 mm.

ZX2 Omron

Download Katalog/Manual/Data Sheet Book disini <<

Stable, Easy & Affordable

  • New Regular-reflective Sensor Head
  • Designed for Optimal Wafer Measurement

ZX-E

Download Katalog/Manual/Data Sheet Book disini <<

The was achieved through technological advancements that vastly improve data communications between amplifiers and enable calculating between different sensor heads.